The Dinetik DT32 is a professional large-format 3D printer, trusted for printing fast turnaround of quality parts.
Designed a larger build and developed a better extrusion system for faster 3D parts printing.
3D Printer Specs.
Specifications
Printer | |
---|---|
Technology: | Fused Filament Fabrication (FFF) |
Electronics: | 32-bit |
Firmware: | RepRap Firmware |
Connectivity: | USB 2.0, Ethernet connector, Wi-Fi |
Build volume: | Ø330 mm x 470 mm, cylindric |
Linear motion system: | Precision linear guides |
Maximum speed: | 200mm/s |
Layer resolution: | From 200 to 30 microns |
XYZ accuracy: | 7, 7, 7 micron |
Chamber | |
---|---|
Chamber: | Enclosed |
Chamber heater: | Yes, temperature up to 60C |
Chamber cooling: | Yes |
Chamber illumination: | Yes |
Chamber door: | Gray glass |
Results | |
---|---|
Plate: | Tempered glass |
Plate heater: | Yes, temperature up to 120C |
Open materials | |
---|---|
Material: | Printer works with 1.75 mm diameter filaments |
Material type: | ABS, PLA, HIPS, PETG, NYLON and other abrasive filaments |
Power requirements | |
---|---|
Power: | Max: 1.25kw (1250w) |
Operating ambient temperature | |
---|---|
Ambient temperature: | 15-35 °C |
Regulatory compliance | |
---|---|
Certificates: | CE |
Printer size | |
---|---|
Dimensions (w x d x h): | 600 mm x 575 mm x 1030 mm |
Weight: | ~53 kg |
Shipping dimensions (w x d x h): | 600 mm x 575 mm x 1030 mm |
Shipping weight: | ~70 kg |
Software | |
---|---|
Supplied software: | Astroprint (integrated slicer) |
Simplify3d (optionally) | |
Astroprint (full control software, cloud, web, mobile, desktop) | |
3D models file formats: | Stl, .obj. |
Print file format: .gcode | Up to 200MB |